Land wijzigen- Inloggen
- Offerte aanvraag
- Categorieën
- Merken
Deze meetklokken worden gebruikt om kleine afstanden en hoeken te meten en deze om te zetten in een draaiende beweging van de meetklok. Ze zijn verkrijgbaar in schaalverdelingen van 0.00005 tot 0.001 inch in het imperiale systeem en van 0.001 tot 0.01 mm in het metrische systeem.
A
B
C
D| Style | Model | Graduaties | Inclusief | Prijs (ex BTW) | |
|---|---|---|---|---|---|
| A | 25-631J | €367.71 | |||
| B | 25-441J | €293.97 | |||
| C | 25-441J W / SLC | €381.35 | |||
| D | 25-341J | €321.59 |
A
B
A
BStarrett 649-serie spilvierkanten bieden gemak en nauwkeurigheid bij het vertrappen van de kop van verticale freesmachines. Deze spilvierkanten zijn gemakkelijker te gebruiken en nauwkeuriger in vergelijking met conventionele methoden van trammen met behulp van meetklokken. Ze zorgen voor loodrechtheid en haaksheid tussen het werkoppervlak en de spil, en worden volledig gemonteerd geleverd met twee AGD Groep 2-meetklokken. Deze apparaten hebben een solide stalen constructie met een zwarte oxide-afwerking voor corrosiebestendigheid en een lange levensduur. Varianten zijn verkrijgbaar in schaalverdelingen van 0.0005 en 0.001 inch.
A
A
B
A
B
CD
E
F
G
H
I
J
K
A
B
C
A
B
C
D
A
B
A
B| Style | Model | RANGE | Prijs (ex BTW) | |
|---|---|---|---|---|
| A | 25-441 / 5J | €334.77 | ||
| B | 25-2041J | €606.32 |
A
B
C
D
| Model | item | Prijs (ex BTW) | |
|---|---|---|---|
| 81-141J | AC4GYP | €341.62 |
| Model | item | Prijs (ex BTW) | |
|---|---|---|---|
| 196MA1Z | AH2GKZ | €532.99 |
| Model | item | Prijs (ex BTW) | |
|---|---|---|---|
| 81-241J | AC4GYQ | €308.21 |
| Model | item | Prijs (ex BTW) | |
|---|---|---|---|
| 25R | AC4GYY | €257.81 |
| Model | item | Prijs (ex BTW) | |
|---|---|---|---|
| 711FSZ | AC4GZB | €358.63 |
| Model | item | Prijs (ex BTW) | |
|---|---|---|---|
| 811-5CZ | AC4GZE | €1,040.33 |
| Model | item | Prijs (ex BTW) | |
|---|---|---|---|
| 696Z | AE9XBD | €1,212.91 |
| Model | item | Prijs (ex BTW) | |
|---|---|---|---|
| 81850 | AF2CQF | €2,114.33 |
| Model | item | Prijs (ex BTW) | |
|---|---|---|---|
| S253Z | AH2GLC | €1,456.94 |
Starrett dial drop indicators, also known as plunger-style dial indicators, come with a dial face attached to a stem with a contact point on the end. When the contact point meets the workpiece, the up-and-down motion of the plunger is increased on the graduated dial face.
Some of the major parts of dial indicators are a dial consolidated on the main scale, the plunger, locking screw or locknut, mini dial that indicates the number of revolutions and magnification mechanism.
The two basic types of indicator dials are balanced and continuous. To use one or the other is usually decided by the gauge and the range of the indicator. However, in general, if the resistances are reciprocal, like +/- 0.001 inches, the balanced dial is used.
Starrett dial indicators are one of the main measuring tools used in precision engine building. These dial indicators are suitable for measuring crankshaft thrust, deck clearances and other measurements that need the distance between two surfaces.
Starrett test indicators are quite distinct from dial indicators. The most notable difference is that dial indicators have plunger-type contacts. Whereas the test indicators feature lever-type contacts while they are also smaller and lighter in comparison to dial indicators.
Starrett has been manufacturing tools in the United States, having its headquarters in Athol, Massachusetts.
Starrett dial indicators usually range from 0.25 mm to 300 mm, with graduations of 0.001 mm to 0.01 mm (metric) or 0.00005 to 0.001 inches.
To make sure the indicator hand can move freely, it should be able to move to its total capacity and the zero ends of the scale in one fluid movement. Some of the guidelines are as follow
Lift the plunger and slip a 0.020-inch gauge block underneath. Drop the plunger onto the surface of the gauge block. Inspect that the indicator reads 0.020-inch. Then, lift and lower the plunger two more times to check that the dial indicator provides the same measurement in the exact spot constantly.